COOLIO D130
COOLIO D130 VW TL 774-J (G13)
Description:
Coolio D130 is a coolant additive concentrate based on mono ethylene glycol and glycerol. It has a combination of active agents which is formulated using an ingenious selection of inhibitors based on hybrid technology. It is free of nitrites, amines and phosphates and contains a performance anti-corrosion inhibitor system, based on silicates combined with proven OAT (Organic acid technology). It offers great protection to modern passenger cars as well as commercial vehicle engines against frost, corrosion and overheating across its entire engine service life. Coolio D130 fulfills the requirements of VW coolant specification VW TL 774-J (G13).
Features & Benefits:
Coolant Standard:
Performance Levels /Meets or Exceeds:
Application:
Coolio D130 must be diluted with water before filling into cooling system. We recommend distilled or demineralized water for this. Depending on water hardness and quality (hardness not greater than 3.6 mmol/l), dilution with tap water is also possible. Coolio D130 should be blended with water in a concentration amongst 33% to 60% by volume prior to infilling. The usage of a 50/50 ratio for the mixture of water and Coolio D130 is generally advisable.
Coolio D130 is a coolant additive concentrate based on mono ethylene glycol and glycerol. It has a combination of active agents which is formulated using an ingenious selection of inhibitors based on hybrid technology. It is free of nitrites, amines and phosphates and contains a performance anti-corrosion inhibitor system, based on silicates combined with proven OAT (Organic acid technology). It offers great protection to modern passenger cars as well as commercial vehicle engines against frost, corrosion and overheating across its entire engine service life. Coolio D130 fulfills the requirements of VW coolant specification VW TL 774-J (G13).
Features & Benefits:
- Contains renewable raw materials
- Contains no amines, nitrites and phosphates
- Suitable for aluminum as well as cast iron engines
- Anti-cavitation, preventing foam and the retention of air, ensuring the good performance of the pump
Coolant Standard:
- ASTM D 3306
Performance Levels /Meets or Exceeds:
- Volkswagen TL-774 J (G13)
Application:
Coolio D130 must be diluted with water before filling into cooling system. We recommend distilled or demineralized water for this. Depending on water hardness and quality (hardness not greater than 3.6 mmol/l), dilution with tap water is also possible. Coolio D130 should be blended with water in a concentration amongst 33% to 60% by volume prior to infilling. The usage of a 50/50 ratio for the mixture of water and Coolio D130 is generally advisable.
Subcategory: ANTIFREEZE / COOLANTS
